Diff: LinuxUsbTwoTwoOneEight
Differences between current version and predecessor to the previous major change of LinuxUsbTwoTwoOneEight.
Other diffs: Previous Revision, Previous Author
| Newer page: | version 5 | Last edited on March 1, 2012 11:09 pm | by PhilHollenback | |
| Older page: | version 2 | Last edited on February 23, 2012 7:20 pm | by PhilHollenback | Revert |
@@ -1 +1,30 @@
-Describe
[LinuxUsbTwoTwoOneEight
] here
.
+!!USB and Linux
+
+I recommend the 2.2.18 kernel (as of 1/23/00, anyway). One of the nice features of this kernel is a backport of the 2.4.0 USB code. This makes it relatively simple to configure USB devices.
+
+* Start at the
[linux-usb homepage|http://www.linux-usb.org
]
+
+* Enable USB in your BIOS. This is usually under 'assign interrupt to USB'
+
+* When rebuilding your kernel, make sure to enable USB. Go ahead and compile all the USB drivers as modules.
+
+* Download the [usbd scripts|http://sourceforge.net/project/showfiles.php?group_id=3581].
+
+* Untar usb utilities as /etc/usb
+
+* cp /etc/usb/hotplug to /sbin
+
+* Add '/etc/usb/rc.usb' to an rc script. It needs to go in rc.sysinit if you are going to use USB systems early in the boot process, otherwise stick it in rc.local:%%%
+ /etc/usb/rc.usb start
+
+* Reboot and check /var/log/dmesg. You should see some messages indicating that the USB system is initialized. Check 'lsmod' output for usb modules.
+
+I tested USB support with a [SanDisk CF Reader].
+
+Since 2.2.18 doesn't support DevFS, you have to do some fiddling with device files.
+
+I also got a USB mouse working the other day, I will post that info is anyone is interested
.
+
+CategoryGeekStuff
+
+CategoryLinuxStuff
current version
USB and Linux
I recommend the 2.2.18 kernel (as of 1/23/00, anyway). One of the nice features of this kernel is a backport of the 2.4.0 USB code. This makes it relatively simple to configure USB devices.
- Start at the linux-usb homepage
- Enable USB in your BIOS. This is usually under 'assign interrupt to USB'
- When rebuilding your kernel, make sure to enable USB. Go ahead and compile all the USB drivers as modules.
- Download the usbd scripts.
- Untar usb utilities as /etc/usb
- cp /etc/usb/hotplug to /sbin
Add '/etc/usb/rc.usb' to an rc script. It needs to go in rc.sysinit if you are going to use USB systems early in the boot process, otherwise stick it in rc.local:
/etc/usb/rc.usb start
- Reboot and check /var/log/dmesg. You should see some messages indicating that the USB system is initialized. Check 'lsmod' output for usb modules.
I tested USB support with a SanDisk CF Reader.
Since 2.2.18 doesn't support DevFS, you have to do some fiddling with device files.
I also got a USB mouse working the other day, I will post that info is anyone is interested.
