Diff: LmSensorsAsusAsevenEmTwoSixSix
Differences between version 4 and previous revision of LmSensorsAsusAsevenEmTwoSixSix.
Other diffs: Previous Major Revision, Previous Author
Newer page: | version 4 | Last edited on March 1, 2012 5:52 pm | by PhilHollenback | Revert |
Older page: | version 3 | Last edited on March 1, 2012 5:51 pm | by PhilHollenback | Revert |
@@ -57,5 +57,5 @@
Note: doesn't report VID values.
Sorry, no sample output for this one.
-CAtegoryGeekStuff
+CategoryGeekStuff
version 4
lm_sensors settings for Asus A7M266 motherboard.
Load these modules:
i2c-viapro i2c-isa w83781d
Note that sensors-detect loads a via686a modules, but you don't need that module to get sensor readings.
Use this sensors.conf:
chip "as99127f-*" label in0 "VCore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute temp2 @*2.0, @/2.0 label temp1 "M/B Temp" label temp2 "CPU Temp" # set limits to 5% for the critical voltages # set limits to 10% for the non-critical voltages # set limits to 20% for the battery voltage set in0_min 1.75 * 0.95 set in0_max 1.75 * 1.05 set in2_min 3.3 * 0.95 set in2_max 3.3 * 1.05 set in3_min 5.0 * 0.95 set in3_max 5.0 * 1.05 set in4_min 12 * 0.90 set in4_max 12 * 1.10 # examples for temperature limits set temp1_over 50 set temp1_hyst 60 set temp2_over 70 set temp2_hyst 80 ignore in1 ignore fan2 ignore fan3 ignore in5 ignore in6 label fan1 "CPU Fan"
Note: doesn't report VID values.
Sorry, no sample output for this one.