View Source: LmSensorsAsusAsevenEmTwoSixSix

You are viewing an old revision of this page. View the current version.

lm_sensors settings for Asus A7M266 motherboard.

Load these modules:

<verbatim>
i2c-viapro
i2c-isa
w83781d
</verbatim>

Note that sensors-detect loads a ''via686a'' modules, but you don't need that module to get sensor readings.

Use this sensors.conf:

<verbatim>
chip "as99127f-*"

    label in0 "VCore"

    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"

    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)
    compute temp2 @*2.0, @/2.0

    label temp1 "M/B Temp"
    label temp2 "CPU Temp"

# set limits to  5% for the critical voltages
# set limits to 10% for the non-critical voltages
# set limits to 20% for the battery voltage

    set in0_min 1.75 * 0.95
    set in0_max 1.75 * 1.05
    set in2_min 3.3 * 0.95
    set in2_max 3.3 * 1.05
    set in3_min 5.0 * 0.95
    set in3_max 5.0 * 1.05
    set in4_min 12 * 0.90
    set in4_max 12 * 1.10

# examples for temperature limits
    set temp1_over 50
    set temp1_hyst 60
    set temp2_over 70
    set temp2_hyst 80

    ignore in1
    ignore fan2
    ignore fan3
    ignore in5
    ignore in6

    label fan1 "CPU Fan"
</verbatim>

Note: doesn't report VID values.

Sorry, no sample output for this one.

View Source: LmSensorsAsusAsevenEmTwoSixSix

Main Categories

Search

Toolbox

RecentChanges

Favorite Categories

Views