View Source: LmSensorsAsusCuvFourXd

You are viewing an old revision of this page. View the current version.
lm_sensors configuration notes for the Asus CUV4X-D motherboard.

modules to load:

<verbatim>
i2c-viapro
i2c-isa
w83781d
</verbatim>

modules.conf entry:

<verbatim>
alias char-major-89 i2c-dev
</verbatim>

/etc/sensors.conf:

<verbatim>
chip "as99127f-*"

    label in0 "VCore 1"
    label in1 "VCore 2"

    label in2 "+3.3V"
    label in3 "+5V"
    label in4 "+12V"

    compute in3 ((6.8/10)+1)*@ ,  @/((6.8/10)+1)
    compute in4 ((28/10)+1)*@  ,  @/((28/10)+1)

    compute temp2 (@*30/43)+25, (@-25)*43/30
    compute temp3 (@*30/43)+25, (@-25)*43/30

    label temp1 "M/B Temp"
    label temp2 "CPU1 Temp"
    label temp3 "CPU2 Temp"

    label fan1 "CPU1 Fan"
    label fan2 "CPU2 Fan"

    # fan3 is not connected.
    ignore fan3

    # -12V and -5V settings give values so bogus that
    # I suspect they aren't connected to sensors.
    ignore in5
    ignore in6

# set limits to  5% for the critical voltages
# set limits to 10% for the non-critical voltages
# set limits to 20% for the battery voltage

    set in0_min vid*0.95
    set in0_max vid*1.05
    set in1_min vid*0.95
    set in1_max vid*1.05
    set in2_min 3.3 * 0.95
    set in2_max 3.3 * 1.05
    set in3_min 5.0 * 0.95
    set in3_max 5.0 * 1.05
    set in4_min 12 * 0.90
    set in4_max 12 * 1.10

# temperature limits

    set temp1_over 60
    set temp1_hyst 65
    set temp2_over 65
    set temp2_hyst 69
    set temp3_over 65
    set temp3_hyst 69
</verbatim>

Sample sensors output:

<verbatim>
as99127f-i2c-0-2d
Adapter: SMBus Via Pro adapter at e800
VCore 1:   +1.71 V  (min =  +0.00 V, max =  +0.00 V)
VCore 2:   +1.71 V  (min =  +0.00 V, max =  +0.00 V)
+3.3V:     +3.38 V  (min =  +3.14 V, max =  +3.46 V)
+5V:       +4.73 V  (min =  +4.73 V, max =  +5.24 V)       ALARM
+12V:     +11.00 V  (min = +10.82 V, max = +13.19 V)
CPU1 Fan: 5314 RPM  (min =   -1 RPM, div = 2)
CPU2 Fan: 5273 RPM  (min =   -1 RPM, div = 2)
M/B Temp:    +27?C  (high =   +60?C, hyst =   +65?C)
CPU1 Temp: +32.0?C  (high =   +65?C, hyst =   +69?C)
CPU2 Temp: +32.8?C  (high =   +65?C, hyst =   +69?C)
ERROR: Can't get VID data!
alarms:
beep_enable:
          Sound alarm enabled
</verbatim>

Note: sensors-detect wants to load the via686a module, but you don't seem to need that to get sensor data.

Note: lm_sensors can't get VID.
View Source: LmSensorsAsusCuvFourXd

Main Categories

Search

Toolbox

RecentChanges

Favorite Categories

Views
